ddrescue-loop -ata 6 -loop 9999 -act 5 /dev/loop0 WD240.log -b 4096 -O -P -m domain.map --cpass=5 -n ddrescue -fd /dev/sdc /dev/loop0 WD240.log -b 4096 -O -P -m domain.map --cpass=5 -n GNU ddrescue 1.23 Press Ctrl-C to interrupt Initial status (read from mapfile) (sizes limited to domain 0 B to 239481389056 B of 240057409536 B) rescued: 154248 MB, tried: 1216 MB, bad-sector: 72559 kB, bad areas: 15736 Current status Data preview: No data available ipos: 16423 MB, non-trimmed: 10289 kB, current rate: 0 B/s opos: 16423 MB, non-scraped: 1133 MB, average rate: 0 B/s non-tried: 3354 MB, bad-sector: 72559 kB, error rate: 992 B/s rescued: 154248 MB, bad areas: 15736, run time: 4m 12s pct rescued: 97.12%, read errors: 2, remaining time: n/a time since last successful read: n/a Copying non-tried blocks... Pass 5 (forwards) ddrescue: Can't reopen input file: No medium found DDLOOP #1 Чт 30 ноя 2023 10:45:04 +05 ddrescue -fd /dev/sdc /dev/loop0 WD240.log -b 4096 -O -P -m domain.map --cpass=5 -n GNU ddrescue 1.23 Press Ctrl-C to interrupt Initial status (read from mapfile) (sizes limited to domain 0 B to 239481389056 B of 240057409536 B) rescued: 154248 MB, tried: 1216 MB, bad-sector: 72559 kB, bad areas: 15736 Current status Data preview: No data available ipos: 16423 MB, non-trimmed: 10420 kB, current rate: 0 B/s opos: 16423 MB, non-scraped: 1133 MB, average rate: 0 B/s non-tried: 3353 MB, bad-sector: 72559 kB, error rate: 992 B/s rescued: 154248 MB, bad areas: 15736, run time: 5m 44s pct rescued: 97.12%, read errors: 2, remaining time: n/a time since last successful read: n/a Copying non-tried blocks... Pass 5 (forwards) ddrescue: Can't reopen input file: No medium found DDLOOP #2 Чт 30 ноя 2023 10:52:12 +05 ddrescue -fd /dev/sdc /dev/loop0 WD240.log -b 4096 -O -P -m domain.map --cpass=5 -n GNU ddrescue 1.23 Press Ctrl-C to interrupt Initial status (read from mapfile) (sizes limited to domain 0 B to 239481389056 B of 240057409536 B) rescued: 154248 MB, tried: 1216 MB, bad-sector: 72559 kB, bad areas: 15736 Current status Data preview: No data available ipos: 16423 MB, non-trimmed: 10551 kB, current rate: 0 B/s opos: 16423 MB, non-scraped: 1133 MB, average rate: 0 B/s non-tried: 3353 MB, bad-sector: 72559 kB, error rate: 420 B/s rescued: 154248 MB, bad areas: 15736, run time: 5m 21s pct rescued: 97.12%, read errors: 2, remaining time: n/a time since last successful read: n/a Copying non-tried blocks... Pass 5 (forwards) dmesg ata6.00: ATA-10: Western Digital SSD 240GB, ZD0R3G40, max UDMA/133 ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA Western Digital 3G40 PQ: 0 ANSI: 5 sd 5:0:0:0: Attached scsi generic sg3 type 0 sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sd 5:0:0:0: [sdc] Attached SCSI removable disk ata6.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x6 frozen ata6.00: failed command: READ FPDMA QUEUED ata6.00: cmd 60/80:f0:80:75:e9/00:00:01:00:00/40 tag 30 ncq dma 65536 in res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: status: { DRDY } ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: limiting SATA link speed to 1.5 Gbps ata6: hard resetting link ata6: COMRESET failed (errno=-16) ata6: reset failed, giving up ata6.00: disabled ata6: EH complete sd 5:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=64s sd 5:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 01 e9 75 80 00 00 80 00 blk_update_request: I/O error, dev sdc, sector 32077184 op 0x0:(READ) flags 0x0 phys_seg 16 prio class 0 sdc: detected capacity change from 240057409536 to 0 sd 5:0:0:0: [sdc] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s sd 5:0:0:0: [sdc] tag#22 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 loop0: p1 p2 p3 sd 5:0:0:0: [sdc] Stopping disk sd 5:0:0:0: [sdc] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: limiting SATA link speed to 1.5 Gbps ata6: COMRESET failed (errno=-16) ata6: reset failed, giving up ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: link is slow to respond, please be patient (ready=0) ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATA-10: Western Digital SSD 240GB, ZD0R3G40, max UDMA/133 ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA Western Digital 3G40 PQ: 0 ANSI: 5 sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 5:0:0:0: Attached scsi generic sg3 type 0 sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sd 5:0:0:0: [sdc] Attached SCSI removable disk ata6.00: exception Emask 0x0 SAct 0x800 SErr 0x0 action 0x6 frozen ata6.00: failed command: READ FPDMA QUEUED ata6.00: cmd 60/80:58:00:76:e9/00:00:01:00:00/40 tag 11 ncq dma 65536 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: status: { DRDY } ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: configured for UDMA/133 ata6: EH complete ata6.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6 frozen ata6.00: failed command: READ FPDMA QUEUED ata6.00: cmd 60/80:70:00:76:e9/00:00:01:00:00/40 tag 14 ncq dma 65536 in res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: status: { DRDY } ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: hard resetting link ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: configured for UDMA/133 ata6: EH complete ata6.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x6 frozen ata6.00: failed command: READ FPDMA QUEUED ata6.00: cmd 60/80:18:00:76:e9/00:00:01:00:00/40 tag 3 ncq dma 65536 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: status: { DRDY } ata6: hard resetting link ata6: link is slow to respond, please be patient (ready=0) ata6: COMRESET failed (errno=-16) ata6: hard resetting link