[ 35.484665] elogind-daemon[1262]: Suspending system...
[ 35.484673] PM: suspend entry (deep)
[ 35.496844] Filesystems sync: 0.012 seconds
[ 35.496948] Freezing user space processes ... (elapsed 0.000 seconds) done.
[ 35.497716] OOM killer disabled.
[ 35.497717] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 35.498825] printk: Suspending console(s) (use no_console_suspend to debug)
[ 35.499253] serial 00:04: disabled
[ 35.578228] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[ 35.578837] sd 5:0:0:0: [sdb] Stopping disk
[ 35.627711] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 35.627836] sd 1:0:0:0: [sda] Stopping disk
[ 35.878518] amdgpu 0000:0f:00.0: amdgpu: BACO reset
[ 36.288289] ACPI: EC: interrupt blocked
[ 36.448076] ACPI: PM: Preparing to enter system sleep state S3
[ 36.777943] ACPI: EC: event blocked
[ 36.777944] ACPI: EC: EC stopped
[ 36.777945] ACPI: PM: Saving platform NVS memory
[ 36.777954] Disabling non-boot CPUs ...
[ 36.779623] smpboot: CPU 1 is now offline
[ 36.781383] smpboot: CPU 2 is now offline
[ 36.783034] smpboot: CPU 3 is now offline
[ 36.784831] smpboot: CPU 4 is now offline
[ 36.786464] smpboot: CPU 5 is now offline
[ 36.788034] smpboot: CPU 6 is now offline
[ 36.789544] smpboot: CPU 7 is now offline
[ 36.790981] smpboot: CPU 8 is now offline
[ 36.792338] smpboot: CPU 9 is now offline
[ 36.793713] smpboot: CPU 10 is now offline
[ 36.795135] smpboot: CPU 11 is now offline
[ 36.795571] ACPI: PM: Low-level resume complete
[ 36.795588] ACPI: EC: EC started
[ 36.795588] ACPI: PM: Restoring platform NVS memory
[ 36.795690] LVT offset 0 assigned for vector 0x400
[ 36.796156] Enabling non-boot CPUs ...
[ 36.796198] x86: Booting SMP configuration:
[ 36.796198] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 36.796327] microcode: CPU1: patch_level=0x08701021
[ 36.798764] CPU1 is up
[ 36.798785] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 36.798893] microcode: CPU2: patch_level=0x08701021
[ 36.808491] CPU2 is up
[ 36.808514] smpboot: Booting Node 0 Processor 3 APIC 0x8
[ 36.808623] microcode: CPU3: patch_level=0x08701021
[ 36.818547] CPU3 is up
[ 36.818573] smpboot: Booting Node 0 Processor 4 APIC 0xa
[ 36.818681] microcode: CPU4: patch_level=0x08701021
[ 36.828578] CPU4 is up
[ 36.828602] smpboot: Booting Node 0 Processor 5 APIC 0xc
[ 36.828711] microcode: CPU5: patch_level=0x08701021
[ 36.838639] CPU5 is up
[ 36.838670] smpboot: Booting Node 0 Processor 6 APIC 0x1
[ 36.838783] microcode: CPU6: patch_level=0x08701021
[ 36.848672] CPU6 is up
[ 36.848695] smpboot: Booting Node 0 Processor 7 APIC 0x3
[ 36.848848] microcode: CPU7: patch_level=0x08701021
[ 36.858717] CPU7 is up
[ 36.858747] smpboot: Booting Node 0 Processor 8 APIC 0x5
[ 36.858861] microcode: CPU8: patch_level=0x08701021
[ 36.868792] CPU8 is up
[ 36.868811] smpboot: Booting Node 0 Processor 9 APIC 0x9
[ 36.868920] microcode: CPU9: patch_level=0x08701021
[ 36.878863] CPU9 is up
[ 36.878888] smpboot: Booting Node 0 Processor 10 APIC 0xb
[ 36.879001] microcode: CPU10: patch_level=0x08701021
[ 36.888886] CPU10 is up
[ 36.888910] smpboot: Booting Node 0 Processor 11 APIC 0xd
[ 36.889027] microcode: CPU11: patch_level=0x08701021
[ 36.898985] CPU11 is up
[ 36.899826] ACPI: PM: Waking up from system sleep state S3
[ 36.900293] ACPI: EC: interrupt unblocked
[ 37.058846] ACPI: EC: event unblocked
[ 37.058893] xhci_hcd 0000:08:00.0: xHC error in resume, USBSTS 0x401, Reinit
[ 37.058897] usb usb1: root hub lost power or was reset
[ 37.058898] usb usb2: root hub lost power or was reset
[ 37.059119] sd 1:0:0:0: [sda] Starting disk
[ 37.059121] sd 5:0:0:0: [sdb] Starting disk
[ 37.059391] serial 00:04: activated
[ 37.192599] nvme nvme0: 16/0/0 default/read/poll queues
[ 37.228456] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[ 37.389597] ata5: SATA link down (SStatus 0 SControl 330)
[ 37.399595] ata1: SATA link down (SStatus 0 SControl 300)
[ 37.399623] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 37.400284] ata6.00: supports DRM functions and may not be fully accessible
[ 37.401048] ata6.00: supports DRM functions and may not be fully accessible
[ 37.401713] ata6.00: configured for UDMA/133
[ 37.638553] usb 1-2: reset low-speed USB device number 2 using xhci_hcd
[ 37.878547] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[ 38.028437] [drm] Fence fallback timer expired on ring sdma0
[ 38.548445] [drm] Fence fallback timer expired on ring sdma0
[ 39.058456] [drm] Fence fallback timer expired on ring sdma0
[ 39.088048] [drm] UVD and UVD ENC initialized successfully.
[ 39.189005] [drm] VCE initialized successfully.
[ 39.198489] OOM killer enabled.
[ 39.198490] Restarting tasks ... done.
[ 39.198883] PM: suspend exit
[ 39.198980] elogind-daemon[1262]: System resumed.
[ 40.079049] igb 0000:0a:00.0 enp10s0: igb: enp10s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 42.418521] ata2: link is slow to respond, please be patient (ready=0)
[ 45.808596] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 45.811633] ata2.00: configured for UDMA/133
[ 35.484673] PM: suspend entry (deep)
[ 35.496844] Filesystems sync: 0.012 seconds
[ 35.496948] Freezing user space processes ... (elapsed 0.000 seconds) done.
[ 35.497716] OOM killer disabled.
[ 35.497717] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 35.498825] printk: Suspending console(s) (use no_console_suspend to debug)
[ 35.499253] serial 00:04: disabled
[ 35.578228] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[ 35.578837] sd 5:0:0:0: [sdb] Stopping disk
[ 35.627711] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 35.627836] sd 1:0:0:0: [sda] Stopping disk
[ 35.878518] amdgpu 0000:0f:00.0: amdgpu: BACO reset
[ 36.288289] ACPI: EC: interrupt blocked
[ 36.448076] ACPI: PM: Preparing to enter system sleep state S3
[ 36.777943] ACPI: EC: event blocked
[ 36.777944] ACPI: EC: EC stopped
[ 36.777945] ACPI: PM: Saving platform NVS memory
[ 36.777954] Disabling non-boot CPUs ...
[ 36.779623] smpboot: CPU 1 is now offline
[ 36.781383] smpboot: CPU 2 is now offline
[ 36.783034] smpboot: CPU 3 is now offline
[ 36.784831] smpboot: CPU 4 is now offline
[ 36.786464] smpboot: CPU 5 is now offline
[ 36.788034] smpboot: CPU 6 is now offline
[ 36.789544] smpboot: CPU 7 is now offline
[ 36.790981] smpboot: CPU 8 is now offline
[ 36.792338] smpboot: CPU 9 is now offline
[ 36.793713] smpboot: CPU 10 is now offline
[ 36.795135] smpboot: CPU 11 is now offline
[ 36.795571] ACPI: PM: Low-level resume complete
[ 36.795588] ACPI: EC: EC started
[ 36.795588] ACPI: PM: Restoring platform NVS memory
[ 36.795690] LVT offset 0 assigned for vector 0x400
[ 36.796156] Enabling non-boot CPUs ...
[ 36.796198] x86: Booting SMP configuration:
[ 36.796198] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 36.796327] microcode: CPU1: patch_level=0x08701021
[ 36.798764] CPU1 is up
[ 36.798785] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 36.798893] microcode: CPU2: patch_level=0x08701021
[ 36.808491] CPU2 is up
[ 36.808514] smpboot: Booting Node 0 Processor 3 APIC 0x8
[ 36.808623] microcode: CPU3: patch_level=0x08701021
[ 36.818547] CPU3 is up
[ 36.818573] smpboot: Booting Node 0 Processor 4 APIC 0xa
[ 36.818681] microcode: CPU4: patch_level=0x08701021
[ 36.828578] CPU4 is up
[ 36.828602] smpboot: Booting Node 0 Processor 5 APIC 0xc
[ 36.828711] microcode: CPU5: patch_level=0x08701021
[ 36.838639] CPU5 is up
[ 36.838670] smpboot: Booting Node 0 Processor 6 APIC 0x1
[ 36.838783] microcode: CPU6: patch_level=0x08701021
[ 36.848672] CPU6 is up
[ 36.848695] smpboot: Booting Node 0 Processor 7 APIC 0x3
[ 36.848848] microcode: CPU7: patch_level=0x08701021
[ 36.858717] CPU7 is up
[ 36.858747] smpboot: Booting Node 0 Processor 8 APIC 0x5
[ 36.858861] microcode: CPU8: patch_level=0x08701021
[ 36.868792] CPU8 is up
[ 36.868811] smpboot: Booting Node 0 Processor 9 APIC 0x9
[ 36.868920] microcode: CPU9: patch_level=0x08701021
[ 36.878863] CPU9 is up
[ 36.878888] smpboot: Booting Node 0 Processor 10 APIC 0xb
[ 36.879001] microcode: CPU10: patch_level=0x08701021
[ 36.888886] CPU10 is up
[ 36.888910] smpboot: Booting Node 0 Processor 11 APIC 0xd
[ 36.889027] microcode: CPU11: patch_level=0x08701021
[ 36.898985] CPU11 is up
[ 36.899826] ACPI: PM: Waking up from system sleep state S3
[ 36.900293] ACPI: EC: interrupt unblocked
[ 37.058846] ACPI: EC: event unblocked
[ 37.058893] xhci_hcd 0000:08:00.0: xHC error in resume, USBSTS 0x401, Reinit
[ 37.058897] usb usb1: root hub lost power or was reset
[ 37.058898] usb usb2: root hub lost power or was reset
[ 37.059119] sd 1:0:0:0: [sda] Starting disk
[ 37.059121] sd 5:0:0:0: [sdb] Starting disk
[ 37.059391] serial 00:04: activated
[ 37.192599] nvme nvme0: 16/0/0 default/read/poll queues
[ 37.228456] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[ 37.389597] ata5: SATA link down (SStatus 0 SControl 330)
[ 37.399595] ata1: SATA link down (SStatus 0 SControl 300)
[ 37.399623] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 37.400284] ata6.00: supports DRM functions and may not be fully accessible
[ 37.401048] ata6.00: supports DRM functions and may not be fully accessible
[ 37.401713] ata6.00: configured for UDMA/133
[ 37.638553] usb 1-2: reset low-speed USB device number 2 using xhci_hcd
[ 37.878547] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[ 38.028437] [drm] Fence fallback timer expired on ring sdma0
[ 38.548445] [drm] Fence fallback timer expired on ring sdma0
[ 39.058456] [drm] Fence fallback timer expired on ring sdma0
[ 39.088048] [drm] UVD and UVD ENC initialized successfully.
[ 39.189005] [drm] VCE initialized successfully.
[ 39.198489] OOM killer enabled.
[ 39.198490] Restarting tasks ... done.
[ 39.198883] PM: suspend exit
[ 39.198980] elogind-daemon[1262]: System resumed.
[ 40.079049] igb 0000:0a:00.0 enp10s0: igb: enp10s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 42.418521] ata2: link is slow to respond, please be patient (ready=0)
[ 45.808596] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 45.811633] ata2.00: configured for UDMA/133